General settings Of Riding’Times Z8 Assembly Video
Riding’Times Z8 Assembly Video is an easy process. All parameters can only be set when your e-bike stops. The steps for the general song are as follows:
In the power-on state, when the display shows a speed of 0. Trip distance reset Press and hold the buttons at the same me for more than 2 seconds to reset the trip distance.
Restore factory dEF refers to factory reset.dEF-n represents not restoring factory settings, and dEF-y represents restoring factory settings. Press and hold the buttons at the same me for more than 2 seconds to enter the factory reset interface, and press the button / to select a parameter.
Riding Times Z8 Assembly Video
Custom setting For Riding’Times Z8 Assembly Video
All parameters can only be set when your e-bike stops.
The steps for customizing are as follows:
In the power-on state, when the display shows a speed of 0. Press and hold the buttons at the same me for more than 2 seconds to enter the selection interface of custom Seng opons.
Press the button / to switch the selection interface of general Seng options, and press the button to enter the parameter modification interface. Press the buon / for parameter selecon.
Press the button to save the parameter and return to the selection interface of custom Seng options. Press and hold the button to save the parameter and exit the selection interface of custom Seng options.
Rated voltage seng P1 refers to the rated voltage seng opon. Available values include 36V and 48V. Press the button to enter the parameter modification interface. Press the buon / for parameter selcon.
Details
Press the button to save the parameter and return to the select on the interface of general Seng options. Take out all the accessories from the package. Laying the bike flat here is for better video clarity, but do not imitate it as it may damage the disc brake. Please keep it in a vertical position. Install the kickstand bracket.
Install the front wheel. Thank you. Install the handlebar. Thanks for watching! Install the front light. Thanks for watching! Thanks for watching! Connect the headlight wire Install the front fender Thank you.
Thanks for watching! Install the right pedal arc. Install the left pedal L. Thanks for watching! Insert the key into the battery box. Turn on the switch of the battery. The final step, test if it’s working properly.
Riding’Times Z8 Assembly Video: Please keep it in a vertical position. It is the first and most essential step you can also check all these details in the video. The assembly of a bicycle is efficient in such a way that it does not matter how much weight is put on it.
Install the kickstand bracket. The second step is to install; a kickstand bracket. This is used to turn on the motor. You will be happy to use it.
Install the front wheel. Wheels are the most important thing for any vehicle. Without wheels, a vehicle can not be called a vehicle.
Some More Steps Of Riding’Times Z8 Assembly Video:
Install the handlebar. The handlebar is the controller of your bike. The handle can be adjusted at any angle, If you like an upper handle adjust it there, and if you want a lower handle install it there.
Install the front light. A high-quality light is waiting to be enabled. This light consumes very little light and provides highly efficient light.
Connect the headlight wire. Without wire, it is not possible to turn the light on. The next step is to install the headlight wire with the battery.
Install the front fender. The front fender is the place where you can put your gadgets. This premium thing helps you to put anything with you during cycling.
Riding’Times Z8 Assembly Video Final Steps:
Install the right pedal. Right and left paddles could be installed very easily. You will be happy to install these things.
Install the left pedal L. The second paddle should be installed in the opposite direction of the first and it should be equal to the first one.
Insert the kick into the battery box. The battery box has a place for a second switch of the motor and light. This switch is the controller of the light for the complete cycle.
Turn on the switch of the battery. Turn on all the switches now you are near to playing your cycle.
The final step test if it’s working properly. The final step is riding, if it is working properly get a ride. But if you face any issues feel free to contact us.